We supply fasteners and hardware to the following industries:
  
Aerospace
   Appliance
   Automotive
   Defense
   Naval/Maritime
   OEM
   Window and Door

Fasteners & Hardware
  Anchors
  Bolts
  Cap Screws
  Carriage Bolts
  Door Hardware
  Electronic Hardware
  Hex Bolts
  Structural Bolts
Nuts
  Finished Nuts
  Lock Nuts
  Weld Nuts
Pins
Rivets
Rods
Sc
rews
 
Clamps    
  Hangers
  Hex Head Cap Screws
  Machine Screws
  Set Screws
  Sockets
  Struts
Tapping Screws
Washers
  Bevel Washers
  Bellville Washers   
  Domed Washers
  Flat Washers
  Lock Washers
  Tooth Washers
Window Hardware
Door Hardware

Services
  Kitting / Bagging
  Private Labeling
  Stocking Programs 
    - Just-in-time
    - Kan Ban
    - Zero Inventory
    - Consignment

 

MS51861 : Mil-Spec Hardware

MS51861 : Mil-Spec Hardware Specification
Screw, Tapping-Thread Forming, Type AB, Pan Head, Cross-Recessed

MS51861 CAD DrawingClick on drawing for larger view

REQUIREMENTS:

1. MATERIAL: Carbon steel shall be AISI 1016, 1018, 1019, 1021, 1022 or 1024 (hardened) in accordance with Fed. Std. No. 66. Corrosion-resisting steel shall be AISI 410 (hardened) in accordance with Fed. Std. No. 66.

2. PROTECTIVE COATING: Carbon steel shall be cadmium plated in accordance with QQ-P-416, Type II, Class 3. Corrosion-resisting steel shall be passivated in accordance with QQ-P-35.

3. THREADS: The threads shall be in accordance with procurement specification.

4. RECESS: The recess shall be in accordance with MS9006.

5. HOLE SIZES: For approximate hole sizes see MS24632.

6. DIMENSIONS: All dimensions are in inches, unless otherwise specified.

7. PART NUMBER: The MS part number consists of the MS number, plus the dash number. Example: MS51861-12

8. Referenced documents shall be of the issue in effect on date of invitations for bid.

9. For design feature purposes, this standard takes precedence over procurement documents referenced herein.

10. SUPERSEDES: AN530, MS24617, MS24618, MS24622, MS24641, and MS24642; BCXX3.1, BCXX3.2, BCXX5.1, BCXX5.2, BQBX3.1 and BQBX5.1.

Interchangeability Tables:

The screws covered by the following dash numbers of MS24637 and MS24638 are cancelled after 25 February 1963. The screws covered by the following dash numbers of MS24641, MS24642 and AN530 are cancelled after 15 August 1963. The screws covered by the following dash numbers of MS24617 and MS24618 are cancelled after 27 August 1969. The screws covered by the following dash numbers of MS24621 and MS24622 are cancelled after 15 May 1975. The cancelled screws cannot always replace the superseding screws and should be used until existing stock is depleted. Use only the superseding screws of MS51861 for design and engineering. Replacement shall be in accordance with these tables.

Need the Spec?

Click here to download MS51861 Specification
(PDF Format).



Great Lakes Fasteners
2097 Case Parkway
North Twinsburg, Ohio 44087

Ohio: 330-425-4488
Nationwide: 800-589-4578
Fax: 330-425-4705

ISO 9001:2008 Certified

  • Need a spec or quote?
  • It's easy-
  • call 800-589-4578
  • or fill in below

Copyright Great Lakes Fasteners, Inc. 2008

GLFTechnical Fastener Supply specializes in a wide range of industrial and military specification (MIL Spec) fasteners; including MS fasteners, AN Fasteners, and NAS Fasteners.