We supply fasteners and hardware to the following industries:
  
Aerospace
   Appliance
   Automotive
   Defense
   Naval/Maritime
   OEM
   Window and Door

Fasteners & Hardware
  Anchors
  Bolts
  Cap Screws
  Carriage Bolts
  Door Hardware
  Electronic Hardware
  Hex Bolts
  Structural Bolts
Nuts
  Finished Nuts
  Lock Nuts
  Weld Nuts
Pins
Rivets
Rods
Sc
rews
 
Clamps    
  Hangers
  Hex Head Cap Screws
  Machine Screws
  Set Screws
  Sockets
  Struts
Tapping Screws
Washers
  Bevel Washers
  Bellville Washers   
  Domed Washers
  Flat Washers
  Lock Washers
  Tooth Washers
Window Hardware
Door Hardware

Services
  Kitting / Bagging
  Private Labeling
  Stocking Programs 
    - Just-in-time
    - Kan Ban
    - Zero Inventory
    - Consignment

 

MS28775 : Mil-Spec Hardware

MS28775 : Mil-Spec Hardware Specification
Packing, Performed, Hydraulic, +275°F (“O” Ring)

MS28775 CAD DrawingClick on drawing for larger view

REQUIREMENTS:

Entire Standard Revised

  • (1) O-Ring Sizes -013 through -28, -117 through -149 and -223 through -247 are intended only for use as static seals, and are not to be used in applications with reciprocating or rotary involvement.
  • (2) Example of Part No. MS28775-21 = packing with nominal 1D Dia .796 in., T Dia .139 in., or 20.22 mm ID Dia, 3.530 mm T Dia.
  • (3) Rings may be off-register, due to mold misalignment, not to exceed 0.003 inch, provided all cross-sectional diameters, including the protrusions (flash excluded) of both halves, where applicable, satisfy “T” dimensions.
  • (4) Certain provision (dimensions for sizes -001 thru -050, -106 thru -178, -210 thru -281, -325 thru -3349, -425 thru -460) of this standard are the subject of international standardization agreement ASCC Air STD 17/27 and NATO STANAC 3444. When revision or cancellation of this standard is proposed which will effect or violate the international agreement concerned, the preparing activity will take appropriate reconciliation action through international channels, including departmental standardization offices, if required.
  • (5) These O-Ring sizes do not meet the standards of MIL-C-5514 and are intended for non-standard applications. They are inactive for new design.
  • For design purposes, this standard takes precedence over procurement documents referenced herein. Referenced documents shall be of the issue in effect on date of invitations for bid or request for proposal, except that referenced adopted industry documents shall give the date of the issue adopted.

Need the Spec?

Click here to download MS28775 Specification
(PDF Format).



Great Lakes Fasteners
2204 East Enterprise Parkway
Twinsburg, Ohio 44087

Ohio: 330-425-4488
Nationwide: 800-589-4578
Fax: 330-425-4705

ISO 9001:2015 Certified

  • Need a spec or quote?
  • It's easy-
  • call 800-589-4578
  • or fill in below

Copyright Great Lakes Fasteners, Inc. 2008

GLFTechnical Fastener Supply specializes in a wide range of industrial and military specification (MIL Spec) fasteners; including MS fasteners, AN Fasteners, and NAS Fasteners.