We supply fasteners and hardware to the following industries:
  
Aerospace
   Appliance
   Automotive
   Defense
   Naval/Maritime
   OEM
   Window and Door

Fasteners & Hardware
  Anchors
  Bolts
  Cap Screws
  Carriage Bolts
  Door Hardware
  Electronic Hardware
  Hex Bolts
  Structural Bolts
Nuts
  Finished Nuts
  Lock Nuts
  Weld Nuts
Pins
Rivets
Rods
Sc
rews
 
Clamps    
  Hangers
  Hex Head Cap Screws
  Machine Screws
  Set Screws
  Sockets
  Struts
Tapping Screws
Washers
  Bevel Washers
  Bellville Washers   
  Domed Washers
  Flat Washers
  Lock Washers
  Tooth Washers
Window Hardware
Door Hardware

Services
  Kitting / Bagging
  Private Labeling
  Stocking Programs 
    - Just-in-time
    - Kan Ban
    - Zero Inventory
    - Consignment

 

MS20257 : Mil-Spec Hardware

MS20257 : Mil-Spec Hardware Specification
Hinge Continuous

MS20257 CAD DrawingClick on drawing for larger view

REQUIREMENTS:

1. MATERIAL: AL alloy 5052 H24 or H34 per QQ-A-250/8 Corrosion resistant steel per ASTM A167 A176 A177 A240 A412 A666 and A693 Type 301 302 or 304

2. Finish aluminum alloy anodized MIL-A8625 Type II or none depending on coding corrosion resistant steel none

Notes:

  • 1. Remove all Burrs and sharp edges
  • 2. Dimensions in inches unless otherwise specified tolerances decimals +-.010 Angles +-1/2°

3. Part number add H X or Y before first dash no for half hinge without pin

Examples of part nos.

  • MS20257-2-800 = complete hinge AL alloy unanodized 1062 wide x 800 long with CDR res steel pin
  • MS20257P2-800 = Complete hinge AL alloy anodized 1062 wise x 800 long with cadmium plated CDR res steel pin
  • MS20257C2-850 = Complete hinge cor res steel 1062 wide x 800 long with cor res steel pin
  • MS20257H2-800 = Type H half hinge AL alloy unanodized 1062 wide (open width of complete hinge) x 800 long without pin
  • MS20257HP2-800 = Type H half hinge AL alloy anodized 1062 wide (open width of complete hinge) x 800 long without pin
  • MS20257HC2-875 = Type H half hinge cor res steel 1062 wide (open width of complete hinge) x 875 long without pin

4. In event of a conflict between the text of this standard and the references cited herein the text of this standard shall take precedence.

5. Referenced government (or non-government) documents of this issue listed in that issue of the Department of Defense Index of Specifications and Standards (OODISS) specified in the solicitation form a part of this standard to the extent specified herein.

Need the Spec?

Click here to download MS20257 Specification
(PDF Format).



Great Lakes Fasteners
2097 Case Parkway
North Twinsburg, Ohio 44087

Ohio: 330-425-4488
Nationwide: 800-589-4578
Fax: 330-425-4705

ISO 9001:2008 Certified

  • Need a spec or quote?
  • It's easy-
  • call 800-589-4578
  • or fill in below

Copyright Great Lakes Fasteners, Inc. 2008

GLFTechnical Fastener Supply specializes in a wide range of industrial and military specification (MIL Spec) fasteners; including MS fasteners, AN Fasteners, and NAS Fasteners.